JURRY - Phaephe ea OLIVE PVC-O

• Phaephe ea PVC-O ke eng?

Phaephe ea PVC-O (Phaephe ea PVC e Otlolohileng ka Biaxial)ke mofuta o mocha oa phaephe ea khatello e hlahisoang ka ho otlolla liphaephe tsa setso tsa PVC-U ka bobeli ka lehlakoreng le ka lehlakoreng tlas'a boemo bo tenyetsehang haholo. Mokhoa oa ho otlolla biaxial o fetola liketane tsa limolek'hule ho tloha sebopehong se otlolohileng ho ea sebopehong sa marang-rang se kang letlooeng, e leng se ntlafatsang haholo litšobotsi tsa eona tsa mechini.

Lekhotla la Molao - MohloaareTheknoloji e nang le karolelano e phahameng ea ho tsitlella e eketsa ho otlolla ha limolek'hule tsa PVC ka ho rapama le ka bolelele, e ntlafatsa haholo ts'ebetso ea lihlahisoa tsa phaephe ea PVC-O.

• Tlhophiso ea Lisebelisoa tsa Phaephe ea PVC-O

Liphaephe tsa PVC-O li arotsoe ka lihlopha tse hlano ho latela Matla a tsona a Bonyane a Hlokahalang (MRS): 315, 355, 400, 450, le 500. Boleng ba MRS bo khethoa ke mokhoa oa ho etsa thepa le mokhoa oa ho otlolla.

Sehlopha se phahameng, matla a thepa a phahameng, khatello e phahameng ea lebitso. Ho DN le PN e tšoanang, sehlopha se phahameng sa thepa ea liphaephe, bokhoni bo phahameng ba hydraulic, tahlehelo e tlase ea hlooho ea liphaephe, litšenyehelo tse tlase.

Ho latela litlhoko tse tloaelehileng, Liphaephe tsa JURRY - OLIVE PVC-O lia fihlella Sehlopha sa 500.

• Liphaephe tsa PVC-O khahlanong le Liphaephe tsa Setso

• LEKGOTLA LA BAAHLOLI - THEPVC-O e Phelang Pipe — Khabone e Tlase, Poloko ea Matla, le E Sireletsa Tikoloho

JURRY - Liphaephe tsa OLIVE PVC-O li fana ka melemo e meholo tšebelisong ea thepa, tšebeliso ea matla a tlhahiso, le poloko ea matla a ts'ebetso. Ka botenya ba lebota bo halofo feela ea liphaephe tsa PVC-U, li boloka 50% ea thepa e tala, li fokotsa tšebeliso ea mehloli le mesi ea carbon dioxide.

JURRY - Liphaephe tsa OLIVE PVC-O li emela moloko o mocha oa liphaephe tsa phetisetso ea metsi tse nang le khatello e phahameng tse fumanehang kajeno.

Tshebetso ea lisebelisoa karolong e 'ngoe le e 'ngoe ea mohala oa tlhahiso oa PVC-O

1. Sistimi ea ho ntša metsi:

Moralo o khethehileng oa li-screw, ho kopanya thepa ka mokhoa o ts'oanang, phello e ntle ea ho etsa polasetiki, tlhahiso e tsitsitseng

2. Hlooho ea shoa:

Sebopeho se ikhethang le moralo oa kanale li netefatsa kabo e lekanang ea ho qhibiliha le boleng bo phahameng ba ho bopa

3. Sistimi ea ho pholisa ea vacuum size:

Ka ho sebelisa sekoahelo sa tšepe e sa ruseng sa 304, bokaholimo ba kahare ba sleeve ea boholo bo sebelitsoe ka ho khetheha bakeng sa ho nepahala ho phahameng; Bokaholimo ba phaephe bo boreleli; Taolo e nepahetseng ea mocheso oa metsi

4. Terekere ea boemo ba pele:

Taolo e nepahetseng ea lebelo le feto-fetohang; Seporo se amohela li-block tsa rabara tse hanelang ho tsofala tse phahameng, tse sa thelleng

5. Sistimi ea ho futhumatsa ea bobeli:

Ha ho potoloho ea moea o chesang o sa feleng, ho futhumatsoa ha lebota la phaephe ka mokhoa o ts'oanang, ho nepahala ha taolo ea mocheso ± 1 ℃

6. Hlobo ea ho otlolla:

Moralo o ikgethang wa sebopeho sa khoune, o tlatselletswang ke mohlodi wa kgatello ya kantle, o bonolo haholo ho otlolla; Karolelano e phahameng ya ho otlolla le matla a phahameng a phaephe

7. Sistimi ea bobeli ea ho fafatsa:

Spray ea likhutlo tse ngata, bokhoni bo phahameng ba ho pholisa

8. Mochini oa bobeli oa ho hula:

Ho hokahana ho matla, lebelo le nepahetseng

9. Sakha ea ho seha ea lipolanete:

Bokgoni bo phahameng ba ho seha, ho seha ho boreleli le ho makhethe, ha ho na li-burrs, lerata le tlase

10. Mochini oa katoloso:

Ho futhumatsa hole ka infrared, taolo e nepahetseng ea mocheso, ho nepahala ho hoholo ha ho bōptjoa

Flehomabapi le R&D, tlhahiso le ts'ebeliso ea PVC-THE, LEKGOTLA LA BAAHLOLI -MOHLOARE e etella pele ho moetsi oa liphaephe tsa PVC-Ole ka litlhaloso tsa phaephe ea DN110-1200mm. Re inehetse ho tsamaiseng metsi ka khatello, re fana ka ts'ebetso e sebetsang hantle PVC-O phaephesenotlolo sa ho retelehela tsamaisong ditharollo.