JURRY - OLIVE PVC-O Pipe

• What is PVC-O Pipe?

PVC-O Pipe (Biaxial Oriented PVC Pipe) is a new type of pressure pipe produced by stretching traditional PVC-U pipes both axially and radially under a highly elastic state. The biaxial stretching process transforms the molecular chains from a linear structure to a mesh-like network structure, significantly enhancing its mechanical properties.

JURRY - OLIVE high tensile ratio technology maximizes the horizontal and longitudinal stretching of PVC molecules,greatly optimizing the performance of PVC-O pipe products.

• Classification of PVC-O Pipe Materials

PVC-O pipes are classified into five grades based on their Minimum Required Strength (MRS): 315, 355, 400, 450, and 500. The MRS value is determined by the material formulation and the stretching process.

The higher class, higher material strength, higher nominal pressure. At same DN and PN, the higher pipe material class, higher hydraulic capacity, lower pipe head loss, lower cost.

According to the standard requirements, JURRY - OLIVE PVC-O Pipes achieve 500 class.

• PVC-O Pipes vs. Traditional Pipes

• JURRY - OLIVE PVC-O Pipe — Low Carbon, Energy Saving, and Environmentally Friendly

JURRY - OLIVE PVC-O pipes offer significant advantages in material consumption, manufacturing energy use, and operational energy savings. With a wall thickness only half that of PVC-U pipes, they save 50% of raw materials, reducing both resource consumption and carbon dioxide emissions.

JURRY - OLIVE PVC-O pipes represent safe, reliable, and environmentally friendly new generation of high-pressure water transmission pipes available today.

Performance of equipment in each unit of PVC-O production line

1. Extrusion system:

Special screw design, uniform material mixing, good plasticizing effect, stable output

2. Die head:

Unique structure and channel design ensure even distribution of melt and high molding quality

3. Vacuum sizing cooling system:

Adopting a stainless steel 304 casing, the inner surface of the sizing sleeve has been specially treated for high dimensional accuracy; The surface of the pipe is smooth; Accurate control of water temperature

4. First level tractor:

Variable frequency precise speed control; The track adopts high wear-resistant traction rubber blocks, which do not slip

5. Secondary heating system:

No dead angle hot air circulation, uniform heating of the pipe wall, temperature control accuracy ± 1 ℃

6. Stretch mold:

The special cone structure design, supplemented by an external pressure source, is very easy to stretch; High stretch ratio and high pipe strength

7. Secondary sprinkler system:

Multi angle spray, high cooling efficiency

8. Secondary traction machine:

Strong traction, precise speed

9. Planetary cutting saw:

High cutting efficiency, smooth and neat incision, no burrs, low noise

10.  Expansion machine:

Far infrared heating, precise temperature control, high molding accuracy

Focusing on R&D, production and application of PVC-O, JURRY - OLIVE leads the way in PVC-O pipe manufacture with pipe specifications of DN110-1200mm. Dedicated to pressurized water conveyance, we provide efficient PVC-O pipe system turn-key solutions.